Gpib Serial Number

GPIB TO SERIAL CONVERTER Y. Suzuki, K As one GPIB controller can be connected directly with 15 GPIB to serial converters, so the number of connected serial.

Problem: Parsers in the GPIB and Serial ActiveX controls do not correctly interpret negative numbers that do not have at least one digit to the left of the decimal point.

Get Serial Number of GPIB-USB-HS

National Instruments offers cabling options for GPIB applications including serial/parallel port cables.

The National Instruments GPIB-RS232 is a high-performance serial-to-GPIB interface. It transforms a computer with an RS232 serial port into a talker, listener, or.

GPIB Serial Converter Software 1.0 This software is used for Configuring the GPIB-RS232 and GPIB-RS485 Converter Order by Part Number; Review Order Status.

Using the function ibask NI-488.2 version 2.2 or later provided by the GPIB-32.dll, it is possible to query the GPIB interface board for its serial number.

Phillip Brooks, DYNAMICS RESEARCH CORPORATION.

More recent versions of NI-VISA have the

ability to report the serial number of a USB

GPIB controller. It would be nice to have the

PCI GPIB report it s serial number in the

Find best value and selection for your NATIONAL INSTRUMENTS GPIB RS232 GPIB SERIAL CONVERTER search on eBay. World s leading marketplace.

Programmatically Obtaining GPIB Serial Number

How Can I Read the Serial Number of a GPIB Card Programmatically. Primary Software: Primary Software Version: 2.4 Primary Software Fixed Version: N/A.

I ve found this solution earlier, but unfortunately it s not working for GPIB-USB-HS. VISA driver return serial number of connected device, not GPIB-USB converter. From VISA point of view, GPIB-USB-HS is transparent and couldn t be selected as VISA resource.

I m still looking for solution that on the basis of VISA refnum will fetch data like SN, Model, Vendor of gpib interface.

It is possible to open the GPIB interface itself using the VISA name GPIB0::INTFC, but I don t think you can retrieve the serial number through it.

The solution you found using the System Configuration API is really the most flexible solution, since it can be used for other types of NI hardware also, and not just for the GPIB-USB-HS. Is there any particular reason you don t want to use the solution you have already found.

Are you actually trying to obtain the serial number for your National Instruments GPIB controller, or of the instrument that you are connecting to over GPIB.

For the GPIB Controller, the most reliable solution will be to use the NI System Configuration API, as is shown in the second post on this thread. The solution refenced in a later post using the VISA property node will work for some VISA resources like the serial port in the example, but not others. That knowledge base pre-dates the System Configuration API, and the System Configuration API should be the preferred mechanism for new development.

For the GPIB Instrument, the answer is instrument-specific. For a SCPI-compliant instrument, the response to a IDN. query will return product information, and one of the fields is the serial number. For older or non-compliant instruments, you would have to look at the instrument programming reference to determine if there is a method to retrieve the serial number.

I need to be able to control 3 Matsusada REK series DC power supplies using Labview. I don t have the hardware yet so I am using a simulation to test my code. It seems to be working with the simulation, but I would like to know if there are any obvious problems with my code, since this is my first experience with Labview. I would like to be able to turn the output of each supply on and off, set the voltage and current limits, and set the voltage. Let me know if my program is on the right track or completely wrong. Thanks.

I m facing a lot of trouble trying to connect my NI WLS-9234 to my computer

I followed the tutorial but as my computer is running under Windows 7, I had to change a few things regarding the configuration of the wireless connection.

Using the ethernet cable of the WLS-9234, I managed to configure the ethernet and wireless connection

But once I remove the Ethernet cable, the connection is not anymore established

My computer is running with Windows 7 and here is the list of the NI software installed on my laptop

Do you know where I could look to make everything working.

i need Visual C/C code/Labview code for interfacing NI Hardware and sample project example.

I am using SR830 driver provided in NI website.I have modified it to Serial Communication as the one provided is for GPIB.

When i run the examples with the change mentioned,i get the error in all the exapmles.